Electrical Accessories - By adding electrical accessories to your Lazer Star lights its possible to increase the performance and functionality of the lights. By using one of the many options for dual-filament function you can not only get running lights out of them but also brake lights for your rear turns. The options are numerous.
 
Load Equalizers
Load Equalizer:2
For all '91 and later H-D w/auto-cancel feature. Most aftermarket lighting (including Lazer Star Lights) use less power than the factory turn signals. The turn module needs a certain amount of resistance to function correctly. The Load Equalizer increases the resistance in the turn-signal circuit to allow for correct operation of the turn signals and emergency flashers. Note: does not work on '01 and later H-D w/factory alarms. Works on any bike or vehicle.
Load Equalizer 3:4
For use on all '01 and later H-D w/auto-cancel feature when using LED lights and the factory alarm. Provides the same function as the Load Equalizer except calibrated for use with LED turn signals and the factory alarm. Not for use with non-alarmed bikes.
 
Added Function Devices
Converters:
For use with any 20-watt halogen Lazer Star Light for "Dual Filament" function. 1 Converter for each light needed, comes in pairs. Works on any bike or vehicle.
FrontRunner:1,3
Same function as our converters, except factory plugs make installation a "snap". For use on front lights for H-D ONLY.
Illuminator:2
Provides Run/Turn/Brake function for any pair of 20 watt halogen Lazer Star Lights. Includes built in Load Equalizer. Works on any motorcycle or street rod.
TailBones:1,3
Similar to Illuminator in that it provides Run/Turn/Brake function but has H-D factory plugs for easy installation. Load Equalizer NOT required when using this unit with halogen lamps.
SmartEqualizer 1:1,3
Similar to the SmartEqualizer 1 except for use with '01 and later H-D WITH factory alarm ONLY. Also features factory H-D plugs
SmartEqualizer 2:1,4
Same function as the Load Equalizer and Balancer except uses factory H-D plugs for amazingly easy installation. For use with all '91 and later H-D w/auto-cancel and w/o factory alarm ONLY.Similar to the SmartEqualizer 1 except for use with '01 and later H-D WITH factory alarm ONLY. Also features factory H-D plugs.
TailStopper:
Similar to Converters except adds the function of stop to rear turns for turn/stop function.

Wire Kits:
Do your lights look yellow compared to your buddy's lights? Chances are they are wired incorrectly. These are complete and comprehensive kits for Lazer Star passing, off-road or driving lights. Four Kits are available: H-D, Universal Motorcycle, Street and Off-Road/Sandrail applications. All kits feature:
  • Fused Relay
  • Switch
  • All necessary wire, connecters, shrink tubing and tie-wraps · Instructions


 
LSWC1202-2L Converters
LSBT600 FrontRunner 1,3
LSILL01 Illuminator 2
LSBT300 TailBones 1,3
LSLE01 Load Equalizer 2
LSLB01Load Balancer 4
LSBT801 Smart Equalizer 1 1,3
LSBT802 Smart Equalizer 2 1,4
Wire Kits
LSW1005 Universal motorcycle wire kit, 20A sealed toggle switch (6' of black wire for lights)
LSW1010 H-D wire kit, Black handlebar switch (6' of black wire for lights)
LSW1018 H-D wire kit, Chrome handlebar switch (not pictured)
LSW0815 Street wire kit (push-button switch, 8' of wire for lights)
LSW1220 Off-Road/Sand Rail Kit (15' of wire for lights)
1 Manufactured by BikeTronics. www.biketron.com
2 Manufactured by Badlands Motorcycle Products
3 Features H-D factory plugs. For use on '91 and later Harley-Davidson Motorcycles ONLY
4 For use on 2001 and later Harley-Davidson's with factory alarm ONLY.